ZHENJIANG HUAJIAN ELECTRONICS CO.,LTD

High Quality Product, Professional Service, Being The Core Supplier In RF Connection Industry!

N Male Connector Clamp Type For 1/2 Inch Cable

N connectors are one kind of medium and large power connectors with thread connection mechanism made according to MIL-C-39012, IEC 169-16 and CECC22210, It has such characteristics as good vibration-resistance, high reliability and good mechanical and electrical performance. It is widely used for connecting the RF coaxial cables in radio equipment and instruments under vibration condition and other adverse conditions.

Send InquiryChat Now
Product Details

N Connector Clamp Type for 1/2” inch Foam Feeder Cable:


Applicable Standard:

CECC 22210, IEC 60169-16, MIL-C-39012


Description:

The N-type 1/2 connector, also known as the feeder connector, conforms to the IEC 61169-16 standard and is suitable for 1/2-inch foamed cable. It is a core component widely used in communication engineering construction and network optimization.

The N-type 1/2 connector has the characteristics of small size and convenient installation. The interface is threaded, and the clamp design facilitates on-site installation in the construction site.

The connector can be plated with ternary alloy or nickel plating on the main casing, silver plated inner conductor, good corrosion resistance, IP67 waterproof rating, low standing wave (1.15), low intermodulation (-150dbc) The characteristics can meet the performance requirements of communication network construction.

We can provide a variety of N-type 1/2" connectors, the length can be designed according to customer requirements.


HUAJIAN provides type N RF feeder connector as below:


Connector

Gender

Matching Cable

Nut

N male

Straight

1/2”,1/2”sf,7/8”,1/4”,1-5/8”

Circular/Hexagon

N female

Straight

1/2”,1/2”sf,7/8”,1/4”,1-5/8”

/

N male

Right Angel

1/2”,1/2”sf

Circular/Hexagon


Above are the most popular Type N connector we sale, we have many different length connector in stock that can be sent you for reference.

 

Technical Data



Interface

IEC 61169-16

Electrical


Characteristic Impedance

50Ω



VSWR

≤1.15

              

Dielectric Withstanding Voltage

≥2500V RMS,50Hz,

Dielectric Resistance

≥5000MΩ

Contact resistance

 

Inner conductor

outer conductor

≤1.0mΩ

 ≤1.0mΩ

Intermodulation                                             

≤-150dBc

Mechanical



Durability


Mating cycles ≥500

Material and plating



Part

Material

plating

Body

Brass

Tri-Alloy

Center conductor

phosphor bronze

Ag

Insulator

PTFE


Other


Ni

Environmental

Temperature Range

-40℃~+85℃

Watertightness

IP67

ROHS

FULL

 

Note:We can provide other materials and plating specifications according to customers‘requests


blob.png


1/2 flame retardant low loss foam medium coaxial cable


blob.png


The feeder is a signal line connecting the early TV set to the outdoor antenna. The flat line is generally double-lined. The wide distance between the two lines is to reduce the attenuation of the weak signal of the TV by the distributed capacitance between the lines. The line body is an insulating plastic. There is no shielding layer on the outside, and the anti-interference ability is extremely poor. The performance of outdoor use will also be affected by the rainy weather. Nowadays, due to the popularity of cable TV, the TV signal line is completely replaced by coaxial cable.


Its main task is to transmit signal energy efficiently. Therefore, it should be able to transmit the signal power from the transmitter to the input of the transmitting antenna with minimal loss, or transmit the signal received by the antenna to the receiver with minimal loss. At the input end, it should not pick up or generate spurious interference signals, so the transmission line must be shielded. When the physical length of the feeder is equal to or greater than the wavelength of the transmitted signal, the transmission line is also called a long line.

The feeders are divided into 1/2 feeders, 7/8 feeders, 8D feeders, and 10D feeders. Generally, the larger the feeder diameter, the smaller the signal attenuation.


Package Information:

N type Feeder Connectors are vacuum-packed to prevent collision and oxidizing.


N@IE8O9LX4FK9UT{_9OQ93U.png 图片22.png


Our Advantages:

1. We have long term N type Feeder Connector, shipment can be arranged next day after order.

2. Mass production capacity enables us to produce 10, 0000 pcs N feeder connectors per day.

3. Quality control through all production stage guarantees product quality.

4. We are manufacturer who can provide competitive price.

5. Experience R&D team can provide you professional technical support.


Factory Overview:


图片23.png


图片24.png


Certificates:


图片25.png


图片26.png


FAQ:



Q: What is your company MOQ?

A: usually MOQ is 500~1000pcs, we can negotiate.


Q: When is your delivery date?

A: if with stock we can ship out soon after your order confirmation. Usually it takes about 7-10 days for production.


Q: Can your company accept customization?

A: OEM and ODM are welcome.


Q: How do you solve the after-sales service?

A: 3 month warranty, our engineer can provide technical support after sales.


Outlines (we can sent other length type for your check):


图片27.png


N male for 1/2” cable



图片28.png


N male right angle for 1/2” cable


图片29.png


N male for 7/8” cable

If you're looking for N male female straight/right angle solder/clamp type low pim low insertion loss for 1/2,7/8 super-flexible foam feeder cable anti-corrosion connector, welcome to buy the factory price products in stock from our factory. As an experienced China manufacturer, we will offer good after-sale service and fast delivery.

If you're looking for n male connector clamp type for 1/2 inch cable, welcome to buy the factory price products in stock from our factory. As an experienced China manufacturer, we will offer good after-sale service and fast delivery.
Hot Tags: n male connector clamp type for 1/2 inch cable, China, manufacturer, factory price, in stock
Related Products
Inquiry