ZHENJIANG HUAJIAN ELECTRONICS CO.,LTD

High Quality Product, Professional Service, Being The Core Supplier In RF Connection Industry!

7/16(DIN) Male 4 Hole Powder Coating Connector

7/16(DIN) Male 4 Hole Powder Coating Connector

The DIN type connector is designed and manufactured in strict accordance with the ISO standard. The DIN type connector has good corrosion resistance after being sprayed on the surface. It can pass the 720 hour salt spray test and is suitable for the harsh external environment. At the same time, the waterproof design is adopted, so that the connector can pass the IP67 waterproof rating test. The connector is designed with a hexagonal nut for easy installation. At the same time, it has excellent performance in electrical performance, VSWR<1.1 AND PIM<-160dBC, which is convenient for performance debugging of passive components..

Send InquiryChat Now
Product Details

Description:            

The 7/16(DIN) type RF coaxial connector is designed and manufactured in strict accordance with the ISO standard. The DIN type connector has good corrosion resistance after being sprayed on the surface. It can pass the 720 hour salt spray test and is suitable for the harsh external environment. At the same time, the waterproof design is adopted, so that the connector can pass the IP67 waterproof rating test.

The connector is designed with a hexagonal nut for easy installation.

At the same time, it has excellent performance in electrical performance, VSWR<1.1 AND PIM<-160dBC, which is convenient for performance debugging of passive components.


outline:                

blob.png

All dimensions are in mm, tolerances according to ISO 2768 m-H

Interface:               

According to IEC 61169-4, EN 122190, DIN 47223


Material and Plating     

Connector partsMaterialPlating
Center contactSpring bronzeSilver,3-6u
Outer contactBrass

White bronze with

powder coating

DielectricPTFE-
GasketSilicon


Electrical data          

Impedance50 Ω
FrequencyDC~8.3Ghz
VSWR<1.1(0~3Ghz)
Insertion loss≤0.05* f[GHz] dB
Insulation resistance≥10G Ω
Center contact resistance
≤0.4 mΩ
Outer contact resistance≤1.5 mΩ
Working Voltage500V rms
Power handling1800W @ 1Ghz, 800W @ 4 Ghz
PIMD≤-160 dbc(2*43dBm)


Mechnical data          

Mating cycles≥ 500
Center contact captivation:axial≥200 N
Center contact captivation:radial≥50 Ncm
Coupling torque(recommended)25 to 30 Nm
Proof torque≤35 Nm


Enviromental data        

Temperature range-45 ° C to +85 ° C 

Rapid change of temperature

DIN EN 122190,Sub-clouse 4.6.7
Corrosion resistanceDIN EN 122190,Sub-clouse 4.6.10
VibrationDIN EN 122190,Sub-clouse 4.6.3
Climatic categoryDIN EN 122190,Sub-clouse 4.6.5
Damp heatDIN EN 122190,Sub-clouse 4.6.6
Degree of protection(mated pair)IEC 60529,IP67
RoHSCompliant


Who am I?             

Established in 2000, HUAJIAN Electronics Co., is a professional manufacturer that is concerned with the design, development and production of RF coaxial connector, RF Lighting Surge Arrester, AISG connector, FAKRA connector, Cable assembly and Auto wire harness.

Located in Zhenjiang City, Jiangsu Province, HUAJIAN has convenient transportation access. All of our products comply with international quality & RoHS standards and are greatly appreciated in a variety of different markets throughout the world.

Covering an area of 20000 square meters, with registered capital 36 million RMB, we now have 200 employees, 15 percent of whom are engineers, an annual sales figure that exceeds USD 10 million with 20% increasing rate on average and are currently exporting 30 percent of our products worldwide. 


Testing Equipment:   

We have complete testing equipment, including Network Analyzer, intermodulation(PIM) instrument(700~2600M), Salty Spray Testing Chamber, High-Low Temperature Chamber, RoHS spectrometer, 3D Projection Measuring Instrument, Resistance Instrument, Voltage Withstanding Instrument, Wire Tester, Insertion Force Test Instrument ,Air Leak Detector, etc.


blob.png

blob.png

 

Packing and delivery info:

We can ship by air/sea as well as international express such as DHL, FedEx, UPS according to your requests.

blob.png


FAQ:

Q: what’s your company MOQ?

A: MOQ is flexible; we accept trial order in the inial stage.

Q: What's your delivery time?

A: usually between 7 and 10 working days.

Q: Can your company accept customization?

A: OEM & ODM acceptable. we have strong R&D ability, providing customers with technical support.

Q: what is after sale service?

A: 6 months warranty. We can provide technical support after sales.

Q: what is sample policy?

A: we can provide samples for free excluding shipping fees.

Q: what is payment terms?

A: we accept T/T and L/C, it is negotiable


If you're looking for 7/16(din) male 4 hole powder coating connector, welcome to buy the factory price products in stock from our factory. As an experienced China manufacturer, we will offer good after-sale service and fast delivery.
Hot Tags: 7/16(din) male 4 hole powder coating connector, China, manufacturer, factory price, in stock
Related Products
Inquiry